Upgrading Hydraulic suction filter on 4300
cthomp
Join Date: Apr 2004 Posts: 5 alberta |
2004-05-22 86566
After looking at the improvements made to the 10 series hydralic pump suction screen and filter , I wonder if anyone has attempted to upgrade their hundred series to 10 series specs. I have only looked at the hydro models, so I am unsure if it affects all models. More filtration is always better , as I am somewhat uncomfortable with just the suction screen which has already gone through one upgrade. Any input would be greatly appreicated. Thanks
Reply to | Quote Reply | Add Photo
Upgrading Hydraulic suction filter on 4300
Ranger350
Join Date: Sep 2003 Posts: 11 Ontario, Canada |
2004-05-31 87388
whats the difference in the screen? I actually just cleaned mine today, and dumped the fluid (obviously). Yea, there was junk on it, Im quite positive its never been cleaned (1530 hours). ....
Reply to | Quote Reply | Add Photo
Upgrading Hydraulic suction filter on 4300
cthomp
Join Date: Apr 2004 Posts: 5 alberta |
2004-06-01 87469
Ranger350. The PIP (Product improvement plan) on the hundred series was the addition of a top fine mesh screen. This was added due to some people suffering pump damage from contaminants. On the 10 series they have added a spin-on filter under the left side footboard as an extra precaution. This is why I posted , as I want to know if anyone has made the upgrade to their hundred series tractors.
I hope this helps ....
Reply to | Quote Reply | Add Photo
Upgrading Hydraulic suction filter on 4300
Ranger350
Join Date: Sep 2003 Posts: 11 Ontario, Canada |
2004-06-03 87605
my 4600 has a fine mesh screen in the trans. and a filter under the left floorboard. ....
Reply to | Quote Reply | Add Photo
Upgrading Hydraulic suction filter on 4300
lockwoodfe
Join Date: May 2004 Posts: 11 Cincinnati, OH |
2004-06-03 87607
My 4200 (1998) also has the fine mesh screen and filter as original equipment. ....
Reply to | Quote Reply | Add Photo
Upgrading Hydraulic suction filter on 4300
cthomp
Join Date: Apr 2004 Posts: 5 alberta |
2004-06-03 87679
lockwoodfe ; Is the filter you speak of under the floor board , or is under the centre of the tractor in the hydrostatic trans housing? ....
Reply to | Quote Reply | Add Photo
Upgrading Hydraulic suction filter on 4300
Tim
Join Date: Posts: 1 |
2005-10-12 117805
I am having sticky steering on a new hydro tractor. The tractor only has about 35 hours. Trouble shooting says to check the screen. Where is it? ....
Reply to | Quote Reply | Add Photo
Upgrading Hydraulic suction filter on 4300
kwschumm
Join Date: Feb 2003 Posts: 5764 NW Oregon Pics |
2005-10-12 117808
Tim, what tractor do you have? ....
Reply to | Quote Reply | Add Photo
Upgrading Hydraulic suction filter on 4300
Chief
Join Date: Jul 2003 Posts: 4297 Southwest MiddleTennessee Pics |
2005-10-13 117833
On the 42,43, and 4400/4410 machines, the steering has a separate pump but uses the same oil as the hydrostatic pump I believe. ....
Reply to | Quote Reply | Add Photo
Go Top
Share This